020 3393 1661Mon to Fri 9am–7pm · Sat 10am–3pm Book a free survey 020 3393 1661

Fike fire alarm service in London

An approved Fike installer for London: install, service, take over and fault-find.

Book a free survey Call 020 3393 1661

Free survey and a written quote, with a reply within 24 to 48 hours.

  • Approved Fike installer
  • BAFE SP203-1 (fire alarms)
  • Fike registered
  • C-TEC certified

Book your free survey

Step 1 of 3

Four questions. Free survey, free written quote, no obligation.

What do you need help with?

Please choose a service to continue.

Something went wrong sending your request. Please try again, or call 020 3393 1661.

What each accreditation covers, and how to verify it

Fike panels, serviced by an approved installer

Approved status means the training, the parts and the software are the manufacturer's, not a best guess.

  1. Approved installer

    Fike-approved for installation and service, with engineers trained on the panel range.

  2. Faults fixed properly

    Access to the right parts and configuration tools rather than workarounds that store up trouble.

  3. Serviced to BS 5839-1

    Six-monthly servicing, certificate and written report, same as any system we look after.

  4. Takeover welcome

    Inherited a Fike panel from another contractor? The takeover audit is free.

Why use a registered Fike installer?

Fire alarm panels are not generic. A company that knows the Fike range configures, services and fault-finds it faster and more reliably than a general contractor working it out on site. Flame Shield London is BAFE registered and an approved Fike and C-TEC installer, and our technicians are fully qualified and BAFE certified. Whether your Fike system is new, inherited or playing up, you are dealing with people who know the equipment.

Direct answer: Flame Shield London is a registered Fike installer. We install, commission, service and repair Fike fire alarm systems to BS 5839-1, and we can take over a Fike system that another company installed, with a free audit first.

What we do with Fike systems

  • Installation and commissioning of new Fike systems, designed to the right BS 5839-1 category.
  • Servicing and maintenance, six-monthly, with a certificate after every visit.
  • Takeover of Fike systems installed by others, with a free audit first.
  • Fault-finding and repair, from panel faults to device and wiring problems.

Fike panel showing a fault?

If your Fike panel is showing a fault or the alarm keeps sounding, call 020 3393 1661 during opening hours. Sometimes we can talk you through a simple reset or check on the phone. Where a visit is needed, we will diagnose and fix the fault and leave you with a working, certified system. We do not advertise 24/7 callout; our phone is answered during opening hours.

A Fike panel in the wrong hands

Both jobs get called the same thing on the invoice. This is what actually differs.

  1. Access Approved installer, with the manufacturer's tools and parts Fike approved No panel software, so the fault gets muted
  2. Diagnosis The panel read properly, then the actual fault fixed Root cause Devices swapped one at a time until it stops beeping
  3. Servicing Six-monthly service to BS 5839-1, certificate and report every time Every visit A visit that leaves no record behind
  4. Inherited system Free takeover audit, then straight onto a compliant schedule Free audit Told you have to stay with whoever installed it

How it works

Four steps, the price agreed in writing before anyone starts, and one accredited team from survey to certificate.

  1. 01

    Tell us about the panel

    Model if you know it, and what it is doing, or not doing, right now.

  2. 02

    Free audit or survey

    We check the system on site and report on condition, compliance and faults.

  3. 03

    Written quote

    Service, repair or replacement, priced in writing before any work starts.

  4. 04

    Serviced and certificated

    Six-monthly visits, certificate and report every time.

Book a free survey

Fike fire alarm service: your questions answered

Are you a registered Fike installer?

Yes. Flame Shield London is BAFE registered and an approved Fike and C-TEC installer. That means we install, commission, service and maintain Fike fire alarm systems, and our technicians are fully qualified and BAFE certified.

Can you service a Fike system another company installed?

Yes. You do not need to stay with the company that installed your Fike panel. We take over Fike systems from other providers, and the initial takeover audit is free. We inspect the system, report on its condition and compliance, and move it onto a maintenance schedule.

My Fike panel is showing a fault. Can you help?

Often we can. If your Fike panel is showing a fault or the alarm keeps sounding, call us on 020 3393 1661 (Mon to Fri 9am to 7pm, Sat 10am to 3pm). Sometimes we can guide you through a simple check over the phone; where a visit is needed, we will arrange one and put the fault right.

Do you maintain Fike Twinflex systems?

Yes. As an approved Fike installer we service and maintain Fike systems, including two-wire ranges, to BS 5839-1, with a certificate after every service visit.

Services for Fike systems

BS 5839-1

Fire alarm installation

Addressable and conventional systems designed, installed and commissioned to BS 5839-1, with certification on completion.

Fire alarm installation Six-monthly

Maintenance & servicing

Six-monthly inspection by BAFE-certified technicians, with a certificate after every visit.

Maintenance & servicing Free audit

System takeover

Switch provider with no gap in cover. We audit your existing system free of charge before you commit.

Free takeover audit

Working with Fike equipment

Where this comes from

We name the standard rather than quoting it. British Standards are copyright of BSI and have to be bought from them; the links above are to the publisher so you can check any figure on this page against the source.

Free survey · No obligation

Book Fike installation, service or takeover

New system, six-monthly servicing, a takeover, or a fault to fix. Tell us your Fike setup and we will help.

  • BAFE SP203-1 registered for fire alarms, Fike and C-TEC certified
  • Written quote before any work starts
  • Called back within 24 to 48 hours
Book a free survey Prefer to talk?020 3393 1661
/* The draft names the page the visitor came from. It used to say "fire alarm work" on all 48, so someone reading about fire risk assessments sent us a message about alarms and we lost the one piece of context the page had already established. reachTopic is the same field the phone strip reads. */